Tensioned Beam | Civil Engineer Expert , Civil Engineer Ebooks, Construction Engineer Experts, Civil Engineer, Civil Engineer Blog, Engineer News, Structural, Geoengineer, Hydraulic, Management, Jobs, Building Codes, Bids, Contract, Industry, Estimate, Safety, Quality Control, Insurance, Estimate, Industry, Loans, Project Managers, Managers, Construction Standards, Multimedia, Bridge and Road Engineering, Soil Engineering, Hydraulic, Environmental, Surveying, Earthquake, Dam, Tunnel

Post Tensioned Beam

Posted by Civil Engineer Expert On August - 7 - 2009

Post Tensioned Beam

Cable ducts and reinforcement are positioned in the beam mould as shown in picture.

Concrete is cast into the beam mould and allowed to cure to the required initial strength.

Link To This Post

1. Click inside the codebox
2. Right-Click then Copy
3. Paste the HTML code into your webpage

codebox

<a href="http://www.vncegroup.com/post-tensioned-beam.html">Post Tensioned Beam</a>

powered by Linkubaitor

Posted by Civil Engineer Expert On August - 7 - 2009

Pre Tensioned Beam

Tendons and reinforcement are positioned in the beam mould.

Tendons are stressed to about 70-75% of their ultimate strength.

Link To This Post

1. Click inside the codebox
2. Right-Click then Copy
3. Paste the HTML code into your webpage

codebox

<a href="http://www.vncegroup.com/pre-tensioned-beam.html">Pre Tensioned Beam</a>

powered by Linkubaitor